Informació personal
|
GÁMEZ PÉREZ, JOSÉ
|
Ressenya Personal
La trayectoria científica del Dr. Jose Gamez-Perez está caracterizada por más de 20 años de dedicación formativa e investigadora en campo de los polímeros.
En 1993 inicia los estudios de Licenciatura Química en la Universidad de Valencia y en 1996 ingresa en el programa de doble titulación con la Ecole de Chimie, Polymeres et Materiaux de Estrasburgo, en la especialidad de polímeros, obteniendo los títulos de Ldo. Químico (1998), Ing. Químico (1999) y DEA de Fisico-química de materiales moleculares y macromoleculares (1999).
Tras pasar un año en la industria (holding DBK España) como ingeniero de investigación, inicia los estudios de doctorado en 2001 con una beca de Formación de Profesorado Universitario (MCED) en la ETSEIB-UPC, dentro de las instalaciones del Centre Català del Plàstic (Terrassa), donde obtiene el título de doctor en 2006 con la tesis “Relación estructura-propiedades en placas y láminas de polipropileno y copolímeros en bloque etileno-propileno obtenidas por diferentes procesos de transformación”.
La vinculación con el CCP y la UPC se prolongará con diversas figuras de profesor contratado hasta finales del 2010, donde gana una plaza de profesor a tiempo completo en la Universitat Jaume I de Castellón. Allí forma parte constituyente del grupo de investigación Polímeros y Materiales Avanzados (PIMA) y consigue en 2012 acceder al cuerpo de funcionarios como Profesor Titular en el departamento DESID.
A nivel de gestión académica, entre 2011 y 2015 ha ejercido como coordinador del programa de doble titulación EURUJI y grupos de Alto Rendimiento Académico de la ESTCE, en un cargo de director de proyecto de escuela, con el objetivo de renovar los convenios de cooperación y adaptarlos a la estructura grado-máster.
A nivel científico, las líneas de investigación en las que más activamente ha participado son:
a) Relación estructura-proceso-propiedades en termoplásticos
b) Propiedades mecánicas y mecánica de la fractura postcedencia
c) Nanocompuestos de arcillas organomodificadas en matrices termoplásticas
d) Procesado de biopoliésteres orientado al sector del envase y embalaje
En estas líneas ha participado como coautor en 38 artículos indexados y más de 50 comunicaciones a congresos con actas indexadas en el ámbito nacional e internacional. Ha codirigido cuatro tesis doctorales y actualmente dirige como codirector dos tesis más.
Los objetivos hacia los que se dirige la investigación giran en torno a la sostenibilidad ambiental de los plásticos reduciendo su huella de carbono, bien mediante el uso de materias primas renovables, bien optimizando su rendimiento, en los sectores de mayor consumo de materiales plásticos (envase y embalaje, construcción). En este sentido, realizó una estancia de investigación en la Case Western Reserve University en 2015 de cinco meses de duración con el objetivo de desarrollar aerogeles en base arcilla obtenidos con biopoliésteres (PBS y PHBV) por “freeze drying” (liofilización), en cooperación con el Prof. D. Schiraldi..
Nº de Sexenios: 3 (2006, 2012, 2018)
Tesis dirigidas: 4 (2011, 2014, 2017, 2019).
Tesis en curso: 2 (Defensa prevista en 2020).
Artículos indexados:39
Artículos en primer cuartil: 16
Citas en últimos 5 años (2014-2018): 627 (125,4 citas/año) – Scopus data base ;
Indice h: 17 – Scopus data base;
Links
Investigació
Horari Actual
Horari de tutories de José Gámez Pérez
Primer semestre
Dia | Hora Inicial | Hora Final | Data Inicial | Data Final |
---|---|---|---|---|
Dimarts | 09:30 | 11:30 | 28-09-2020 | 02-02-2021 |
Dimecres | 09:30 | 11:30 | 28-09-2020 | 02-02-2021 |
El professor/a té tutories virtuals en el primer semestre
Segon semestre
Dia | Hora Inicial | Hora Final | Data Inicial | Data Final |
---|---|---|---|---|
Dilluns | 10:30 | 13:30 | 04-02-2021 | 31-07-2021 |
Dimecres | 10:30 | 13:30 | 04-02-2021 | 31-07-2021 |
Horari de docència de José Gámez Pérez
Primer semestre
Assignatura | Dia | Hora Inicial | Hora Final | Data Inicial | Data Final |
---|---|---|---|---|---|
EE1015 - LA11 | Dimarts | 11:31 | 13:30 | 15-12-2020 | 15-12-2020 |
EE1015 - LA11 | Dimarts | 11:30 | 13:30 | 13-10-2020 | 24-11-2020 |
EE1015 - LA12 | Dimarts | 11:30 | 13:30 | 01-12-2020 | 01-12-2020 |
EE1015 - LA12 | Dimarts | 11:31 | 13:30 | 06-10-2020 | 17-11-2020 |
EM1015 - LA5 | Dilluns | 15:31 | 17:30 | 19-10-2020 | 30-11-2020 |
EM1015 - LA5 | Dilluns | 15:30 | 17:30 | 14-12-2020 | 14-12-2020 |
ET1015 - LA2 | Dimecres | 11:30 | 13:29 | 14-10-2020 | 02-12-2020 |
ET1015 - LA2 | Dimecres | 11:31 | 13:30 | 16-12-2020 | 16-12-2020 |
Segon semestre
Assignatura | Dia | Hora Inicial | Hora Final | Data Inicial | Data Final |
---|---|---|---|---|---|
DI2010 - AV2 | Dilluns | 08:30 | 10:30 | 08-02-2021 | 24-05-2021 |
DI2010 - LA5 | Dijous | 11:30 | 14:00 | 18-02-2021 | 20-05-2021 |
DI2010 - LA5 | Dijous | 11:31 | 14:00 | 25-03-2021 | 25-03-2021 |
DI2010 - LA6 | Dijous | 09:30 | 12:00 | 25-02-2021 | 27-05-2021 |
DI2010 - LA6 | Dijous | 09:31 | 12:00 | 15-04-2021 | 15-04-2021 |
DI2010 - PR2 | Dilluns | 15:00 | 16:30 | 01-03-2021 | 10-05-2021 |
DI2010 - PR2 | Dimecres | 16:00 | 17:30 | 10-02-2021 | 26-05-2021 |
DI2010 - SE2 | Dimarts | 10:00 | 12:30 | 09-02-2021 | 09-02-2021 |
DI2010 - SE4 | Dimarts | 10:00 | 12:30 | 16-02-2021 | 16-02-2021 |
DI2010 - SE6 | Dijous | 09:30 | 12:00 | 11-02-2021 | 11-02-2021 |
DI2010 - TE2 | Dilluns | 15:00 | 16:30 | 08-02-2021 | 24-05-2021 |
DI2010 - TE2 | Dimecres | 16:00 | 17:30 | 10-02-2021 | 26-05-2021 |
DI2010 - TU2 | Dimarts | 10:00 | 12:30 | 09-02-2021 | 09-02-2021 |
DI2010 - TU4 | Dimarts | 10:00 | 12:30 | 16-02-2021 | 16-02-2021 |
DI2010 - TU6 | Dijous | 09:30 | 12:00 | 11-02-2021 | 11-02-2021 |
EQ1014 - TE1 | Dimarts | 11:00 | 13:00 | 09-02-2021 | 25-05-2021 |
EQ1014 - TE1 | Divendres | 12:30 | 14:15 | 05-02-2021 | 21-05-2021 |
EQ1014 - TU1 | Divendres | 12:30 | 14:15 | 12-02-2021 | 28-05-2021 |
Assignatures amb docència
Assignatures | Titulació |
---|---|
DI1010 - Materiales I | Grado en Ingeniería en Diseño Industrial y Desarrollo de Productos |
DI1047 - Prácticas Externas | Grado en Ingeniería en Diseño Industrial y Desarrollo de Productos |
DI1048 - Trabajo de Final de Grado | Grado en Ingeniería en Diseño Industrial y Desarrollo de Productos |
DI2010 - Materials I | Grau en Enginyeria en Disseny Industrial i Desenvolupament de Productes (Pla de 2020) |
EE1015 - Ciència i Tecnologia de Materials | Grau en Enginyeria Elèctrica |
EM1015 - Ciència i Tecnologia de Materials | Grau en Enginyeria Mecànica |
EM1047 - Trabajo de Final de Grado | Grado en Ingeniería Mecánica |
EQ1014 - Fonaments d'Enginyeria i Tecnologia de Materials | Grau en Enginyeria Química |
ET1015 - Ciència i Tecnologia de Materials | Grau en Enginyeria en Tecnologies Industrials |
SDI414 - Treball de Final de Màster Investigació | Màster Universitari en Disseny i Fabricació (Pla de 2015) |
Publicacions
Publicacions periòdiques amb comitè de selecció
- Effect of the Purification Treatment on the Valorization of Natural Cellulosic Residues as Fillers in PHB‑Based Composites for Short Shelf Life Applications (Epub ahead of print)
- Study of the Compatibilization Effect of Different Reactive Agents in PHB/Natural Fiber-Based Composites
- PHBV/TPU/cellulose compounds for compostable injection molded parts with improved thermal and mechanical performance
- Effect of the addition of sepiolite on the morphology and properties of melt compounded PHBV/PLA blends
- Biocomposites of different lignocellulosic wastes for sustainable food packaging applications
- On the perceptions of students and professors in the implementation of an inter-university engineering PBL experience
- Toughness Enhancement of PHBV/TPU/Cellulose Compounds with Reactive Additives for Compostable Injected Parts in Industrial Applications
- Assessing the thermoformability of poly(3-hydroxybutyrate-co-3- hydroxyvalerate)/poly(acid lactic) blends compatibilized with diisocyanates
- Toca-toca: ejemplos sencillos para conceptos complejos en asignaturas de ciencia y tecnología de materiales
- Compatibilization of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)– poly(lactic acid) blends with diisocyanates
- La metodología de aprendizaje basado en proyectos (ABP) aplicada a asignaturas de ciencia de los materiales en ingeniería en la red IdM@ti
- On the use of tris(nonylphenil) phosphite as a chain extender in melt-blended poly(hidroxybutyrate-co-hidroxyvalerate)/clay nanocomposites: Morphology, thermal stability, and mec
- Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate)/Purified Cellulose Fiber Composites by Melt Blending: Characterization and Degradation in Composting Conditions
- Toughness Enhancement of Commercial Poly (Hidroxybutyrate-co-Valerate) (PHBV) by Blending with a Thermoplastic Polyurethane (TPU)
- Acquisition of transversal skills through PBL: a study of the perceptions of the students and teachers in materials science courses in engineering
- Modification of Nafion Membranes with Polyaniline to Reduce Methanol Permeability
- Adhesion enhancement of powder coatings on galvanised steel by addition of organo-modified silica particles
- Estudio de la relación estructura-propiedades-procesamiento de nanocompuestos basados en poli (ácido láctico) (PLA) y o-MMT
- Sheets of branched poly(lactic acid) obtained by one step reactive extrusion calendering process: Melt rheology analysis
- Effect of the Unidirectional Drawing on Themal and Mechanical Properties of PLA Films with Different L-Isomer Content
- Effect of the Strain Rate and Drawing Temperature on the Mechanical Behavior of EVOH and EVOH Composites
- Films of native and modified starch reinforced with fiber: Influence of some extrusion variables using response surface methodology
- Influence of Crystallinity on the Fracture Toughness of Poly(lactic acid)/Montmorillonite Nanocomposites Prepared by Twin-Screw Extrusion
- Processing of poly(lactic acid)/organomontmorillonite nanocomposites: Microstructure, thermal stability and kinetics of the thermal decomposition
- Fracture behavior of quenched poly(lactic acid)
- Aplicación de la mecánica de la fractura post-cedencia a polímeros
- Kinetics of the thermal decomposition of processed poly(lactic acid)
- Processing of poly(lactic acid): Characterization of chemical structure, thermal stability and mechanical properties
- The effect of organo-modifier on structure and properties of poly[ethylene-(vynil alcohol)]/organo-modified montmorillonite composites
- Procesado del ácido poliláctico (PLA) y de nanocompuestos PLA/montmorillonita en planta piloto: Estudio de sus cambios estructurales y de estabilidad térmica
- Essential work of fracture analysis of the tearing of a ductile polymer film
- Influence of processing on the ethylene-vinyl alcohol (EVOH) properties: application of the successive self-nucleation and annealing (SSA) technique
- Fracture behaviour of de-aged poly(lacticacid) assessed by essential work of fracture and J-Integral methods
- Effect of Recycling and Annealing on the Mechanical and Fracture Properties of Poly(Lactic Acid)
- Fracture behaviour of poly[ethylene-(vinyl alcohol)]/organo-clay composites
- The Essential Work of Fracture (EWF) method - Analyzing the Post-Yielding Fracture Mechanics of polymers
- Influence of femtolaser notch sharpening technique in the determination of essential work of fracture (EWF) parameters
- Blends of HDPE wastes: study of the properties
- Use of extensometers on essential work of fracture (EWF) tests
- Evaluation of the fracture behavior of multi layered Polypropylene Sheets obtained by coextrusion
- Influence of Processing on ethylene-propylene block copolymers II: Fracture behaviour
- Determination of essential work of fracture in EPBC sheets obtained by different transformation process
- Influence of Processing on ethylene-propylene block copolymers: Structure and mechanical behaviour
- Effects of Thickness, Deformation Rate and Energy Partitioning on the Work of Fracture Parameters of uPVC Films
- Characterization of Injected EPBC Plaques Using the Essential Work of Fracture Method
Capítols de llibre
- Inorganic-Based Nanostructures and Their Use in Food Packaging
- Assessing th Project Based Learning methodology in Materials Science courses within an inter-university educational network
Ponències a congressos
- Recent developments towards massive use of PHAs in packaging appliations
- Toughness assessment of novel PHB-Based sheets by means of the essential work of fracture method
- Extending the applicability of PHBV for injected parts
- Estudio de la tenacidad de un polímero biodegradable supertenaz
- Screening of PHB-Based formulations in order to improve its applicability in food packaging
- Improving the thermoformability of bioplastics: PHB-Based Blends
- Influence of cellulose morphology and surface treatment on properties of PHB/Cellulose composites
- Performance enhancement of PHBV based compounds
- PHA-based blends and composites: new materials for sustainable packaging applications
- Touhness enhancement of poly(3-hydroxibutyrate): A key issue for the massive use of this biodegradabla thermoplastic in packaging applications
- How to improve PHB performance to replace commodities in packaging applications
- El aprendizaje‐servicio basado en proyectos: Una oportunidad en grados de ingeniería
- Fostering the usability of PHA to the biodegradable packaging sector
- On the use of polyester reactive extrusion chain extenders as cellulose fibre/PHB compatibilizer
- Improving the industrial applicability of PHBV to the packaging sector
- Óptimo aprovechamiento de las sesiones de laboratorio
- Sesiones de laboratorio: uso de las TIC para la transmisión de los conocimientos teóricos básicos relacionados con la práctica de laboratorio
- Óptimo aprovechamiento de las sesiones de laboratorio
- Espumas de nanocompuestos polímero/arcilla obtenidas mediante liofilización
- Valorizartion of cellulosic agro-based residues in PHB based composits for food packaging applications
- Obtention and characterization of PVOH/clay hybrid foamed systems using the freeze-drying technique
- PHV/PLA/Sepiolite nanocomposites for food packaging applications
- The effect of graphite addition into polymer/clay foamed composites obtained by freeze-drying
- Toughness Enhancement of Commercial Poly (Hydroxybutyrate-co-Valerate) (PHBV) by Blending with a Thermoplastic Polyurethane (TPU)
- Obtención y caracterización de materiales híbridos polímero/arcilla espumados mediante liofilización
- Efecto de la adición de sepiolita en biopoliésteres biodegradables
- WYTWYG: What you touch is what you get in Materials Science and Technology
- Effect of addition of sepiolite in biodegradable biopolyesters
- Extending the usability of PHBV in thermoformings stages
- IDM@TI network & social commitment: A innovative proposal for improving teaching and learning in Materials Science and Engineering (MSE)
- Mejora de las propiedades mecánicas y barrera de materiales biodegradables para el envasado de alimentos
- Estrategias para mejorar la aplicabilidad del Poli(3-Hidroxivalerato-CO-3-Hidroxibutirato (PHBV) al sector del envasado
- El Aprendizaje Servicio en los grados de ingeniería: abriendo el entorno a la Universidad
- Biodegradable and High Performance PHBV/TPU Blends
- Use of poly(hexamethylene) diisocyanate as compatibilizer in PHBV/PLA blends
- Enhancement of the thermoformability of PHBV by blending with a TPU (Abstract)
- Acquisition of transversal skills through PBL: a study of the perceptions of the students and teachers in materials science courses in engineering
- A Project Based Learning interuniversity experience in materials science
- Mejora de las propiedades mecánicas y compatibilidad de mezclas de PHBV/PLA con plastificantes comerciales de origen bio
- Cellulose fiber reinforced PHBV composite with improved performance at high temperature
- Mejora de la termoconformabilidad de PHBV mediante mezclas biodegradables con poliuretano
- Materials in Spanish design
- Estudio del efecto sinérgico entre partículas de sílice organomodificadas y pigmentos anticorrosivos en recubrimientos de poliéster
- Efecto de la adición de extensores de cadena sobre la estabilidad térmica durante el procesado de PHBV
- Caracterización y biodegradación en condiciones de compostaje de compuesto de PHBV / Microcelulosa
- Development and characterization of PHBV-CLAY nanocomposites by melt blending with improved thermal stability
- Inter-university Proyect Based Learning activity for Innovation in Materials and Product Design Teaching
- Materials in Spanish Design
- Nafion/polyaniline composite membranes specifically designed to reduce methanol permeability
- PHBV/Microcelullose composites: Characterization and biodegradation in composting conditions
- Kinetics of thermal decomposition of poly (3-hidroxybutyrate-CO-3-hidroxyvalerate) (PHBV)_ Effect of processing and chain extenders
- New hibrid polyester-silane powder coatings for corrosion prevention applications
- Thermally Stabilized PHBV nanocomposites: obtention and characterization
- Experiencia PBL en el marco de la red de Innovación Docente en Ciencia de Materiales IdM@ati
- UNIVERSITAT JAUME I. The public university of Castelló
- Los materiales en el diseño español
- Más allá del youtube
- Modificación de nafion con polianilina para su aplicación en membranas de electrolito de polímero sólido para células de combustible
- Chain architecture modifications of Poly(Lactic Acid) by reactive extrusion
- Compuestos de PLA/o-MMT: Caracterización Morfológica y Mecánica
- Crystallinity, Mechanical Properties And Thermal Stability Of Poly(Lactic Acid) Processed In A Pilot Plant
- Adaptació de l'Assignatura Materials I (505) d'Enginyeria Tècnica en Disseny Industrial a l'Espai Europeu d'Educació Superior
- Development of polyester coating using branched polymers and silanes
- Relevancia de la agudización de la entalla mediante femtolaser sobre la fractura de polímeros
- Estudio de la estabilidad térmica en nanocompuestos POM/POSS
- Influence of additives on the quench-promoted brittle-ductile transition of polylactic acid (PLA)
- Propiedades mecánicas y a fractura del poli(ácido láctico) (PLA) en función de diversos tratamientos térmicos
- Essential work of fracture of organoclay composites based on evoh-44
- Characterization of highly oriented organoclay/poly(methyl methacrylate) moulded nanocomposites
- Fracture Behaviour of poly(lactic acid) (PLA) and PLA/MMT nanocomposites
- Effect of the annealing on the mechanical properties and fracture behaviour of PLA
- Trabajo Esencial de Fractura de láminas delgadas de policarbonato
- Extensometry applied to the EWF test
- Preparación y Caracterización de filmes multicapa de PP/EPBC
- Influencia del recocido en las propiedades a fractura y en la microestructura de placas inyectadas con EPBC
- Applicability of Essential Work of Fracture in Characterization of EPBC
- Comportamiento mecánico y a fractura de films basados en mezclas de un copolímero de etileno-alcohol vinílico (EVOH)
Direcció de tesis en altres institucions acadèmiques
- Relación estructura-propiedades de films de nanocompuestos de pla
Comités de congresos
- Luis Cabedo Mas, José Gámez Pérez. 2nd Conference for Early Stage Researchers in Polymer Science Through the Aegean Sea (POLYMAR 2018). Atenas (Grècia). 08-10-2018. Científic.
- Javier Molina Castellanos, Luis Cabedo Mas, Jennifer González Ausejo, José Gámez Pérez, Montserrat Puig Brugal. POLYMAR 2013. 1st International Conference in Polymers with especial focus in early stage researchers. Barcelona (Espanya). 03-11-2013. Científic.
Referee de publicacions periòdiques
- José Gámez Pérez. 2020 EXPRESS POLYMER LETTERS.
- José Gámez Pérez. 2019 INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES.
- José Gámez Pérez. 2019 INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES.
- José Gámez Pérez. 2019 Polymers.
- José Gámez Pérez. 2018 POLYMER DEGRADATION AND STABILITY.
- José Gámez Pérez. 2018 EXPRESS POLYMER LETTERS.
- José Gámez Pérez. 2018 Polymers.
- José Gámez Pérez. 2018 POLYMER TESTING.
- José Gámez Pérez. 2018 ENGINEERING FRACTURE MECHANICS.
- José Gámez Pérez. 2017 MATERIALS AND MANUFACTURING PROCESSES.
- José Gámez Pérez. 2017 EXPRESS POLYMER LETTERS.
- José Gámez Pérez. 2016 POLYMER DEGRADATION AND STABILITY.
- José Gámez Pérez. 2016 JOURNAL OF APPLIED POLYMER SCIENCE.
- José Gámez Pérez. 2016 EXPRESS POLYMER LETTERS.
- José Gámez Pérez. 2015 POLYMER INTERNATIONAL.
- José Gámez Pérez. 2015 JOURNAL OF APPLIED POLYMER SCIENCE.
- José Gámez Pérez. 2014 EXPRESS POLYMER LETTERS.
- José Gámez Pérez. 2014 POLYMER COMPOSITES.
- José Gámez Pérez. 2014 POLYMER ENGINEERING AND SCIENCE.
- José Gámez Pérez. 2013 COMPOSITES SCIENCE AND TECHNOLOGY.
- José Gámez Pérez. 2013 POLYMER ENGINEERING AND SCIENCE.
- José Gámez Pérez. 2013 JOURNAL OF REINFORCED PLASTICS AND COMPOSITES.
- José Gámez Pérez. 2013 POLYMER COMPOSITES.
- José Gámez Pérez. 2013 EXPRESS POLYMER LETTERS.
- José Gámez Pérez. 2012 POLYMER COMPOSITES.
- José Gámez Pérez. 2012 POLYMER ENGINEERING AND SCIENCE.
- José Gámez Pérez. 2011 POLYMER ENGINEERING AND SCIENCE.
- José Gámez Pérez. 2011 ENGINEERING FRACTURE MECHANICS.
- José Gámez Pérez. 2011 EUROPEAN POLYMER JOURNAL.